By Greg Whynott -
infos:
Dell Force10 Application Software Version: 8.3.12.0
System Type: S4810
Control Processor: Freescale QorIQ P2020 with 2147483648 bytes of memory.
Global:
sflow collector 10.101.1.60 agent-addr 10.101.8.44 9996
sflow enable
sflow extended-switch enable
sflow polling-interval 30
sflow sample-rate 512
# 1.60 is the collector, 8.44 is the switch itself.
interface:
sflow enable
----
storageswitch-#show sflow
sFlow services are enabled
Global default sampling rate: 512
Global default counter polling interval: 30
Global extended information enabled: switch
1 collectors configured
Collector IP addr: 10.101.1.60, Agent IP addr: 10.101.8.44, UDP port: 9996
0 UDP packets exported
1156316 UDP packets dropped
6262571 sFlow samples collected
Stack-Unit 0 Port set 0
Te 0/0: configured rate 4096, actual rate 8192
Te 0/1: configured rate 4096, actual rate 8192
Te 0/2: configured rate 512, actual rate 1024
Te 0/3: configured rate 512, actual rate 1024
Te 0/4: configured rate 512, actual rate 1024
Te 0/5: configured rate 512, actual rate 1024
Te 0/6: configured rate 512, actual rate 1024
Te 0/7: configured rate 512, actual rate 1024
Te 0/16: configured rate 512, actual rate 1024
Te 0/17: configured rate 512, actual rate 1024
Te 0/18: configured rate 512, actual rate 1024
Te 0/19: configured rate 512, actual rate 1024
Te 0/44: configured rate 512, actual rate 1024
Te 0/45: configured rate 512, actual rate 1024
Te 0/46: configured rate 512, actual rate 1024
Te 0/47: configured rate 512, actual rate 1024
storageswitch-#
storageswitch-#show sflow interface tengigabitethernet 0/0
Te 0/0
Configured sampling rate :4096
Actual sampling rate :8192
Counter polling interval :30
Samples rcvd from h/w :311296
Anyone using sflow on a S4810 or a product within that line?
I did what i thought was a proper configuration referencing the guide, but i'm not seeing any data arrive at my collector. Dell Force10 Application Software Version: 8.3.12.0
System Type: S4810
Control Processor: Freescale QorIQ P2020 with 2147483648 bytes of memory.
sflow collector 10.101.1.60 agent-addr 10.101.8.44 9996
sflow enable
sflow extended-switch enable
sflow polling-interval 30
sflow sample-rate 512
----
storageswitch-#show sflow
sFlow services are enabled
Global default sampling rate: 512
Global default counter polling interval: 30
Global extended information enabled: switch
1 collectors configured
Collector IP addr: 10.101.1.60, Agent IP addr: 10.101.8.44, UDP port: 9996
0 UDP packets exported
1156316 UDP packets dropped
6262571 sFlow samples collected
Stack-Unit 0 Port set 0
Te 0/0: configured rate 4096, actual rate 8192
Te 0/1: configured rate 4096, actual rate 8192
Te 0/2: configured rate 512, actual rate 1024
Te 0/3: configured rate 512, actual rate 1024
Te 0/4: configured rate 512, actual rate 1024
Te 0/5: configured rate 512, actual rate 1024
Te 0/6: configured rate 512, actual rate 1024
Te 0/7: configured rate 512, actual rate 1024
Te 0/16: configured rate 512, actual rate 1024
Te 0/17: configured rate 512, actual rate 1024
Te 0/18: configured rate 512, actual rate 1024
Te 0/19: configured rate 512, actual rate 1024
Te 0/44: configured rate 512, actual rate 1024
Te 0/45: configured rate 512, actual rate 1024
Te 0/46: configured rate 512, actual rate 1024
Te 0/47: configured rate 512, actual rate 1024
storageswitch-#
storageswitch-#show sflow interface tengigabitethernet 0/0
Te 0/0
Configured sampling rate :4096
Actual sampling rate :8192
Counter polling interval :30
Samples rcvd from h/w :311296