Blackmagic UltraStudio 4K - HDMI output and splitters

Does anyone out there have a working combo that splits UltraStudio HDMI output to 2 screens. We currently run the following setup:

MacPro -> UltraStudio via Thunderbolt -> Splitter: Key Digital KD-HD1x2ProK via HDMI -> NEC SpectraView Reference 322UHD + Sony Bravia FW-55X8570C via HDMI.

As soon as we put the splitter in the mix the UltraStudio gets confused and outputs the wrong resolution for both devices. A Quantum video signal tester outputs the correct signal to both devices through the splitter, so I assume the problem is with the UltraStudio. BlackMagic is of no help, so we will check the forums there as well, but i thought i would try here as well.

Thomas

--

-------------------------------

Fido

Rosenlundsgatan 40, 4 tr.

118 53 Stockholm

SWEDEN

Phone: +46855699006

www.fido.se

-------------------------------

To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe